ITSA: Interconnect Technology Suppliers Association ISO 9001 Quality Management System certification

Electronic Components USA

quality components from design to manufacture

 

Press Release 01 April 2021

DualSLIMS Space-Saving Narrow Feedthrough Connectors

New dual-mounting (front or rear), narrow, feedthrough connectors save panel space.

Designed and manufactured in the U.K. by CLIFF Electronics.

 

 

CLIFF Electronics, leaders in the design, development and manufacture of connectors and test equipment, have extended their SLIMS feedthrough connector series with the introduction of their new DualSLIMS range. These allow customers to choose between mounting the connectors on the front of a panel for simple and fast changes in the field, or on the rear for a lower profile and flush appearance when rack mounted or side by side.

 

DualSLIMS narrow feedthrough connectors

 

The 19mm-wide DualSLIMs offer panel builders and system integrators the ability to mount up to 20 connectors in a 1U, 19″ rack panel, rather than 16 of Cliff’s popular 26mm-wide, XLR-form-factor feedthroughs.

 

The new DualSLIMs feedthrough connector range is available in a plastic frame with plain (⌀2.5mm or ⌀3.2mm) or countersunk (⌀3.2mm) fixing holes. A metal frame version is also available finished in nickel or black with plain (⌀3.2mm), countersunk (⌀3.2mm), M3 or #4-40 UNC fixing holes. Panel-cut-out dimensions are 17.15mm × 22.86mm (0.675″ × 0.9″) with mounting hole centres centers of 29mm.

 

The DualSLIM connector range has been launched with 14 different versions:

  • HDMI female to HDMI female,
  • USB3.0 A female to USB3.0 A female,
  • USB3.0 B female to USB3.0 A female,
  • USB2.0 B female to USB2.0 A female,
  • USB2.0 A female to USB2.0 A female,
  • USB2.0 A female to USB2.0 B female,
  • USB-C female to USB-C male,
  • Cat.5e RJ45,
  • Cat.5e shielded RJ45,
  • Cat.6 RJ45,
  • Cat.6 shielded RJ45,
  • Cat.3 RJ11 / RJ14 (6P4C),
  • Cat.6a shielded RJ45,
  • Blanking plate.

With 7 variants of each SLIM and 11 of each DualSLIM, there are more than 250 possible variants.

 

Widely used by audio, broadcast and communications manufacturers. manufacturers in the U.S.A.

 

With its high panel density and low profile, when rear mounted, the CLIFF Electronics DualSLIM may be used in audio, broadcast, AV and communications installations, medical, education and research, industrial control and space.

 

DualSLIMs can be designed-in alongside 1U rack-mounted NUCs and mini-PCs, such as the Raspberry Pi, for projects of every scale. From custom-tuned gaming machines to industrial applications, these are ideal for space-constrained, embedded or IoT systems, digital signage, media production and video conferencing.

 

All of Cliff’s feedthrough connectors allow standard, off-the-shelf, connecting cables to be used for internal connectivity, simplifying and speeding up system assembly and facilitating easy repurposing of equipment.

 

“The narrow form factor is widely used by audio, broadcast and communications manufacturers in the U.S.A. and becoming more popular in the U.K. and Europe for maximising maximizing panel density and for products exported to North America.” comments John Hall, managing director of CLIFF Electronics. “Our new DualSLIMS feedthrough connectors will not only grow our component sales in the U.S.A. but will also be welcomed by other system builders selling their products to that market.”

 

Shielded Cat.6a RJ45 DualSLIMS narrow feedthrough connector

 

The complete range of Cliff standard and feedthrough connectors are in full production and available direct or via major international distributors.

 

 

Quality has always been of prime importance.

 

 

CLIFF feedthrough connectors and accessories

 

Underwriters Laboratories logo Canadian Standards Association logo Verband der Elektrotechnik logo British Electrotechnical Approvals Board logo Japan Electrical Appliance and Material Safety Law (DENAN) logo

 

 

 

About CLIFF Electronics.

Cliff Electronic Components Limited was founded in 1977 to supply the music industry with connectors. Cliff has subsequently greatly expanded its’ products and services to become a high quality supplier to most professional and industrial markets. As both a manufacturer and a distributor, the expansion of its’ product range has established Cliff as a prime source for components. As a UK manufacturer, Cliff is able to respond quickly to customer’s needs for both standard products and custom designs.

 

Cliff manufactures audio, optical and power connectors and accessories, general industrial connectors, foot pedals, lighting connectors, terminal posts, connection blocks, motors and assembly aids. It can also provide a wide range of leads including audio, instrument and power.

 

Cliff has extensive expertise in moulding molding and metalwork. It can provide a design, engineering and manufacturing service for the production of customised customized components and assemblies. Plastics expertise includes injection-moulding,injection-molding, blow-moulding,blow-molding, extrusion, sonic-welding and printing. Metalwork includes stamping, machining, aluminiumaluminum extrusion, finishing and printing.

 

Cliff has the facility to enable assembly, inspection and testing. Cliff’s UK and Far Eastern production plants are certified to ISO 9001 and employ design, engineering, technical, marketing and sales personnel. Quality has always been of prime importance and the majority of Cliff products are covered by approvals from organisations organizations such as UL and VDE.

 

For more information, please contact us.

 

CLIFF Electronics logo with PCB background

Cliff Electronic Components Ltd.
76 Holmethorpe Avenue,
Holmethorpe Industrial Estate,
REDHILL,
Surrey.
RH1 2PF
U.K.

Cliff Electronic Components Ltd.
10580 N McCarran Blvd,
Suite 115-587,
Reno,
NV 89503
U.S.A.

 

Telephone: +44 (0)1737 771375 +1 707 746 8090

Fax: +44 (0)1737 766012 +1 707 746 8092

Website: www.cliffuk.co.uk www.cliffusa.com

 

 

PR091  01 April 2021 | www.cliffuk.co.ukwww.cliffusa.com