VHDCI Cables with additional Ferrite Core Shielding
Board to Board Very High-Density Cable Interconnect.
1 and 2 metre meter leads from CLIFF™ Electronics.
CLIFF™ Electronics, leaders in the design, development and manufacture of connectors and test equipment, offer industry-standard VHDCI (very high density cable interconnect) cables terminated with a 68-pin male connector at each end.
These connecting cables are commonly used for connecting SCSI (Small Computer System Interface) peripherals within computer systems.
The relevant VHDCI specification calls for a 68-pin male-to-male SCSI cable and the connectors are small enough that four can fit on a single PCI card end plate.
Key specifications
- Operating current 0.5 A maximum per contact.
- Operating voltage maximum 30 V AC maximum (RMS) / DC.
- Enhanced EMC shield. EMI protection, ferrite core: ⌀ 17.5 × 28.5 × ⌀ 12 mm.
- Available in standard lengths of 1 and 2 metres. meters.
interconnect for both legacy and new equipment.
John Hall, Managing Director of CLIFF™ Electronics, says, “These cables continue to be much used in connecting peripherals, our VHDCI cable is an interconnect for both legacy and new equipment requiring parallel data transmission.”.
CLIFF™ Electronics can supply
- jack sockets,
- DC power connectors,
- terminal binding posts,
- test connectors and leads,
- optical jacks and leads and
- waterproof connectors.
CLIFF™ are also leaders in the design and manufacture of standard and feed-through connectors for audio, broadcast and industrial systems including fibre-optic. fiber-optic.
CLIFF™ products are available direct or from major, international distributors.
